Very nice desk excellent quality . Assembly was a breeze , probably because I do assembly for a living @Kitset Assembly Services .

Would recommend this desk.

Dislikes: typical flat pack instructions with a few wrongly drawn diagrams and labelled parts in mine but nothing that can't be figured out.

Metal drawer rails look to be sealed one piece units - I wasn't game to try and take them apart. Top two drawers easy enough to affix but the railings in my pack for the bottom draw wouldn't allow the (eighth hole) screws to be put in the right place (big piece of metal wouldn't slide out of the way) so just put them in the next available hole furthest from the 2nd hole screws. Drawer works well anyway but I don't have anything heavy in it for now. The place for the screws is marked on the sides of the drawers with a shallow depression but I would recommend that they be drilled a bit further in with a small drill bit to make it easier for the screws to be inserted.

Likes: Lots

Nice solid unit - looks good, even though typical flat pack particle board.

Comes with two side units (drawers and open cabinet with partition) so you don't have to get them separately which will usually cost more and most likely won't match.

Generous top space.

Gaps between the top and side units handy to keep phones, staplers etc out of the way.

Nice finish for a flat pack furniture. Polish mine with Neopol to give it a deep smooth finish.

Put mine together over a few nights, bit at a time, just be patient and it goes together easy enough. Some of the cam locks need a slight tap to get them in place to screw them home.

Very pleased with my new workspace.

Love my new desk it has plenty of space for me to work from home

Really love the design and the colour.. nice and sturdy.
Great for studywork or a nice workspace in short.
Lots of storage, a great addition to a room.

Great computer desk...my missus left me after I got her to assemble it, she found it really difficult, I would have helped but I had a game of golf to go to!

I got this desk because I liked how it had symmetrical storage on both sides(the shelf is adjustable by 3 heights about an inch or so seperating each height option). I like the study nature of the desk, the colour is a nice medium-dark cool tone of wood. Slightly wider than anticipated but I am confident this desk will last me for years and the tabletop space is generous and so is the storage-would recommend.

This is good for studying because I bought this and I have studied on it for 3 months soo I really enjoy it and I hope I'm not the only person who voted 5 stars.

My partner has one of these desks and loves it I definitely am going to buy one too. There's only one thing that I think should be added which is a lock on the drawers or at least one draw. Otherwise the desk is great!!

Very sturdy desks, we furnished our entire office with these - hideous but durable. Almost 2 years on, with crazy heavy engineering tools being stored on them and constant use; they're almost as they were when first purchased (surprisingly scratch resistant). Reason for the one star short of a happy meal is that it takes FOREVER to assemble! We still have drawers that fall apart because someone decided to shortcut it during our crazy desk-assembling competition, you know who you are...

I brought this desk 2 years ago, due to moving I gave it away and brought the same desk due to it being cheaper than moving the whole desk. I enjoy this desk thoroughly, plently of space in drawers, didn't put shelving in side panel so I can fit my PC in nicely. Desk is wide enough to have one 24' monitor and one 27' monitor side by side comfortably and have space for more stuff. Normal desk chairs fit under but may need to check width as some chairs might be too wide since the space under isn't a lot.
2nd desk of this is the same but different. Made with different wood but I'm not complaining.

This desk suits our needs, and we are very happy with the quality. Fits together well and is a good, sturdy desk.

Very nice desk and good value. A little time consuming to assembly but all pieces accounted for and it went together easily.

Bought in April 2017. On first set up, the desk appeared strong and sturdy. However, I find that the cam locks holding the panels in are constantly coming loose, and I'm always taking a screwdriver to it - particularly on the drawers.

The desk is very heavy (65kg!) and feels sturdy in store which is good, but i later noticed that the components are cheaply made and didn't take much to start peeling around the edges.

It's a nightmare to put together (takes 2 people 2 hours) and the instructions aren't that easy to follow.

I bought one of these but quickly returned it when i noticed the glue holding the plastic screw holes had begun to deteriorate and the screws wouldn't tighten...

If you are looking for a quality desk... this isn't it.

This desk didn't even have all of the pieces in it which we didn't know until we had finished assembling it so the top part of the desk sorta floats without them. Middle draw broke within a month of owning and comes off in your hand when you go to open it. Very low quality materials used on it. Won't ever be buying a desk from warehouse stationary again. Going to buy real wood next time so it is actually sturdy.

This is a great product. Would definitely recommend to others. Although it did take a little while to out together, everything was there, there were letters on the pieces to identify which was which.

Not sure why other people have trouble assembling this desk, I found it very easy & straight forward to put together, & once assembled it was really sturdy.
Exactly what I was after :)

Honestly this desk is fantastic!
Also set up the vertical folders for files. If people are having trouble assembling this, really needed to have played with more lego as a child.

As per Roscos review we are trying to assemble with no stickers identifying each of the pieces even though they have letters in the 'manual'. We thought we had a piece missing as we couldnt find 'I' only to discover later that we had mixed two of the side pieces up so had to undo and redo it. Also the pictures have panel B in two different places?!?!? No measurements given for pieces so a lot of guess work. Estimated time for 2people is 1.5hours....allow for about 3-4hours lol Other than that the quality of product is quite good.

Just opened box and the instructions to assemble are not user friendly. 1. each piece should have a sticker on it to say what part number it is. 2. it says you need a tape measure but does not say how you are to use the tape measure 3. each piece in the instruction manual should have the measurement dimensions so you can confirm it is correct. Therefore first impressions are poor.